The VTA is a performance blow-off valve solution for Mercedes vehicles with an electronic factory diverter valve.
If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.
The VTA shares the successful DV+ design philosophy:
“Keep what works, replace what doesn’t”
This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do.
The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition.
GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve.
It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market.
Key features:
- TMS Technology for faster boost recovery on gearshift and during throttle modulation
- Improved boost holding ability
- Atmosphere venting for blow-off sound
- Retains ECU control
- Simple, direct bolt-on kits include everything you need to install
- Manufactured in Australia in accordance with ISO 9001
VTA or DV+?
Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet.
Why choose a VTA over a “BOV spacer”?
“BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance.
Why choose a VTA over a kit that includes a solenoid?
Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?
VTA BLOW-OFF VALVES ARE CONSTRUCTED WITH THE SAME MATERIALS AND VALVE MECHANISM AS THE DV+, AND THEY OFFER THE EXACT SAME PERFORMANCE AND BOOST HOLDING. HOWEVER, VENTING TO ATMOSPHERE GIVES IT THE SIGNATURE BLOW-OFF SOUND, WHILST THE DV+ KEEPS THINGS QUIET.
COMPETITORS' PRODUCTS FOR THE SAME VEHICLES THAT MAKE SOUND (I.E. BOV "SPACERS") TYPICALLY RETAIN THE PERFORMANCE DEFICIENCIES OF THE FACTORY DIVERTER VALVE, DELETE THE ECU CONTROL, OR REQUIRE FREQUENT MAINTENANCE AND REBUILDS. THE VTA ON THE OTHER HAND IS THE COMPLETE PACKAGE - PERFORMANCE, FIT, RELIABILITY, AND SOUND!
Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet.
Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications.
Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.
We aim to ship orders out as quickly as possible, depending on our stock availability.
However, please note that some items may have longer processing times.
If your order is urgent, we recommend contacting us to confirm availability and estimated shipping times before placing your order.
For any questions or concerns regarding shipping, please don't hesitate to contact us. We're here to help!
If you're unsure whether a product is compatible with your vehicle, we recommend checking with us before making a purchase.
Our team is here to assist you in finding the right fit for your vehicle's make and model.
Don't hesitate to reach out to us with any questions or concerns about compatibility – we're happy to help ensure you get the right product for your needs.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying.